I have another option for you, but the 15" wheel you have is a HWT series 01 which has been discontinued. You may be able to find one used that is in better shape, or may want to look into having the wheel refinished if you are partial to its design.
If you would rather just get new wheels for the trailer I recommend the Aluminum Hi-Spec Series 6 Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 # AM22652 which has a similar design, the same 6 on 5-1/2" bolt pattern, and the same 15" x 6" size... view full answer...
It sounds like you are looking for a locking hitch pin to secure your ball mount to your vehicles trailer hitch receiver.
I recommend the etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome # e98879 if your vehicle has a 1-1/4" trailer hitch receiver, or the # e98880 if you have a 2" trailer hitch receiver. If you are not sure which size your trailer hitch receiver is you can measure the inside length of the coupler to determine which hitch is installed... view full answer...
The Draw-Tite 06623-099 weight distribution system was discontinued back in 2010 and the spring bars are not available. Your best bet at this point is a new system.
For a replacement, I recommend the Reese Steadi-Flex Weight Distribution System which has built-in sway control as well as a streamlined design for easy use. The Steadi-Flex also comes with a lifetime warranty.
In order to make sure you get the correct system, you will need to find out what your total tongue weight is. The... view full answer...
Go To Results